 |
|
|
|
Warning: include(../lib/used.txt) [function.include]: failed to open stream: No such file or directory in /www/analoguehaven.com/web/modular.php on line 32 Warning: include() [function.include]: Failed opening '../lib/used.txt' for inclusion (include_path='.:/usr/local/share/pear:/www/analoguehaven.com/php') in /www/analoguehaven.com/web/modular.php on line 32 |
|
modular |
|
|
analogue solutions cb88 Based on the TR808 Cowbell sound. With the addition of 3 controls a very wide range of sounds can be produced, not just Cowbell. By tuning the 2 oscillators together, tonal sounds can be produced from bass right up to the top end. our used price : $112.00 |
|
|
analogue solutions gt8 8 step dual gate sequencer with 8 step trigger outputs. for more info, please click here. our used price : $144.00 |
|
|
analogue solutions mc01 Master Clock with clock dividers. our used price : $150.00 |
|
|
analogue solutions mt16 A 16 channel MIDI to Gate/Trigger converter. Ideal for triggering drum modules, envelopes and sequencers from MIDI notes. Output is a Gate (MIDI note length information is retained) but can also be used with devices that use Triggers. our used price : $220.00 |
|
|
analogue solutions sd78 Based on the CR78 snare drum. Provides a wide range of truly early electronic snare sounds. our used price : $112.00 |
|
|
analogue systems rs-60 The RS60 Envelope Generator is a flexible EG that generates a four-stage ADSR voltage envelope that varies from 0V to +10V. The envelope can be attenuated and inverted if desired. We currently have two available. our used price : $136.00 |
|
|
analogue systems rs-80 the rs80 generates four waveforms simultaneously. the first two of these are the sine wave and the triangle wave, which are often used for imitating acoustic characteristics such as vibrato and tremolo. our used price : $119.00 |
|
|
analogue systems rs-100 the rs100 24db/oct low-pass filter imitates the minimoog's filter and exhibits almost identical characteristics in both the frequency domain (i.e. what it does to audio signals) and the time domain (i.e. its response over time to cvs). below the cut-off frequency the response is approximately flat down to dc. with the filter fully open, it will pass signals approaching 20khz. our used price : $144.00 |
|
|
analogue systems rs-110 the rs110 consists of a two channel audio mixer followed by four, parallel, resonant filters with voltage controlled frequency and a unique "insert" point in the feedback path that generates and controls resonance. we currently have two available. our used price : $160.00 |
|
|
analogue systems rs-130 The RS130 offers four preset scales and memory for one user-defined scale. It also comes with a range of 63 notes, plus a trigger output generator. There are gated and "free" modes for a wide range of applications. our used price : $480.00 |
|
|
analogue systems rs-150 the sequential switch allows you to select between multiple inputs and direct the chosen signal to the input of the next module in the patch. we currently have two available. our used price : $144.00 |
|
|
analogue systems rs-180 In principle, amplifiers have a simple job - they just amplify or attenuate the signals presented to them. our used price : $97.00 |
|
|
analogue systems rs-270 adaptor converter - converts between 6.35mm, 3.5mm, and phono sockets (2 sets). our used price : $68.00 |
|
|
analogue systems rs-280 the rs280 is a frequency detector and divider that produces a number of squarewave signals derived from the frequency of any cyclic signal presented to its input. our used price : $144.00 |
|
|
analogue systems rs-310 the rs310 is a complex bbd (bucket brigade device) analogue delay line with variable feedback. our used price : $200.00 |
|
|
blacet mx2040 module is a dc-coupled mixer suitable for both audio and cv mixing. each input is center-off with plus and minus phase control. the outputs may be level shifted with a variable +5v to -5v bias control. our used price : $105.00 |
|
|
Doepfer A100 Vocoder System The Doepfer A-100 Vocoder System is an incredibly flexible analog modular vocoder that not only sounds amazing but also features its own built-in modulator which can double as a monophonic synthesizer or sound fx device. our used price : $1,669.00 |
|
|
doepfer a-113 Module is a new sound source that derives from an incoming pulse signal four so-called subharmonics. This module requires the Doepfer A100AD5. For more info, please click here. We currently have two available. our used price : $268.00 |
|
|
doepfer a-114 module contains two separate ring modulators. a ring modulator outputs the product (multiplication x&y) of the signals at inputs x and y. for more info, please click here. our used price : $80.00 |
|
|
doepfer a-121 module is a voltage-controlled multi-mode filter with a cut-off slope of -12 db / octave. for more info, please click here. we currently have three available. normally $180.00 |
|
|
doepfer a-123 module is a voltage-controlled high-pass filter, which filters out the lower parts of the sound spectrum, and lets higher frequencies pass through. for more info, please click here. our used price : $116.00 |
|
|
doepfer a-127 module is a triple resonance filter unit. It contains three separate voltage controlled band pass filters. for more info, please click here. we currently have three available. our used price : $196.00 |
|
|
doepfer a-128 module is a filter bank, made up of 15 parallel band pass filters, all with fixed middle frequencies and bandwidth. for more info, please click here. we currently have two available. our used price : $184.00 |
|
|
doepfer a-129-1 & a-129-2 the a-129 series of modules forms a modular vocoder. the basic components are an analysis section (a-129-1) and a synthesis section (a-129-2). for more info, please click here and here. we currently have two available. our used price : $400.00 |
|
|
doepfer a-129-4 to use the slew limiter section of the 129-3, you need to have module a-129-4 (slew limiter controller) as well. for more info, please click here. our used price : $72.00 |
|
|
doepfer a-129-5 the voiced / unvoiced detector (a-129-5) can recognise voiced and unvoiced sections in the speech signal, and switch the carrier signal accordingly. the incoming speech signal is processed through a pre-amplifier with adjustable gain and a treble boost unit. the treble boost improves the vocoder effect. for more info, please click here. our used price : $80.00 |
|
|
doepfer a-130 Modules A-130 and A-131 provide voltage-controlled amplification. For audio signals, you would normally use the exponential VCA (A-131), and for control voltages, the linear VCA (A-130). It doesn't always have to be that way, though. For more info, please click here. We currently have two available. our used price : $72.00 |
|
|
doepfer a-144 from a linear increasing voltage at the input the module derives four displaced triangle output voltages. when these 4 outputs are connected to the four control voltage inputs of the a-135, one obtains a fading over of the four a-135 audio inputs ("morphing"). for more info, please click here. our used price : $72.00 |
|
|
doepfer a-148 module has two identical sample & hold modules, designed to produce 'staircase' voltages. for more info, please click our used price : $56.00 |
|
|
doepfer a-155 analog and trigger sequencer, 2 rows of 8 steps with knobs and 2 rows of 8 steps switches. for more info, please click here. our used price : $263.00 |
|
|
doepfer a-170 module contains two separate slew limiters, also known as portamento controllers or integrators. the first sl has just one joint control, which sets both rise and fall times (c. 0 ...10 sec). for more info, please click here. our used price : $56.00 |
|
|
doepfer a-171 module is a voltage controlled slew limiter, otherwise known as a portamento controller or integrator. for more info, please click here. we currently have two available. our used price : $72.00 |
|
|
doepfer a-174 module outputs 2 control voltages generated by a spring-loaded x/y cross potentiometer (so-called joy stick). for more info, please click here. our used price : $77.00 |
|
|
doepfer a-175 module is exactly what it says it is: two identical inverters, which will take a voltage and output it in an inverted form - so that an input of +5v will be output as -5v, an input of -2v will be output as +2v, and so on. for more info, please click here. our used price : $52.00 |
|
|
doepfer a-179 Module for converting different illumination intensities into corresponding analog voltage and a gate signal derived from the analog voltage. For more info, please click here. our used price : $72.00 |
|
|
doepfer a-192 Module is a CV-to-MIDI interface that converts 16 control voltages in the range 0...+5V into 16 MIDI controller messages. For more info, please click here. our used price : $140.00 |
|
|
doepfer a-100b84p back panel for power supply mounting. our used price : $35.00 |
|
|
doepfer a-100nt12 12v power supply. our used price : $78.00 |
|
|
portable wiard joystick gr-1209b xy controller joystick outfitted with banana jacks. This unit is mounted in a case and is battery powered. we currently have two available. our used price : $375.00 |
|
|
synthesizers.com q107 the q107 filter changes the harmonic content of signals to create new, interesting sounds. our used price : $96.00 |
|
|
synthesizers.com q112 the q112 mixer provides common mixing functions needed in all systems. a total of four inputs can be mixed. two of the inputs have attenuators. our used price : $56.00 Warning: include(../lib/bottom-prod.txt) [function.include]: failed to open stream: No such file or directory in /www/analoguehaven.com/web/modular.php on line 897 Warning: include() [function.include]: Failed opening '../lib/bottom-prod.txt' for inclusion (include_path='.:/usr/local/share/pear:/www/analoguehaven.com/php') in /www/analoguehaven.com/web/modular.php on line 897 |
