add-on pack #1 includes 2 compression springs, 1 clockwork spring, 5 wobbly tension springs (pulling them is great), 1 carbon strip, 2 thumb-screws and washers, 2 small magnets and a ~0.6m spring steel wire (cut yourself).
add-on pack #2 includes 1x steel wire, 2 mini springs (2 x 19mm), 1 bamboo brush, 1 tension spring (58 x 10mm), 2 metal marbles (6-8mm) and 1 rubberband (200 x 6mm).
about the bass kalimba:
the bass kalimba set fits for the microphonic soundbox mk2 and for it's little brother, the microphonic playground. it has longer strips than the standard soundbox kalimba and therefore sounds deeper. two of the strips are thicker than the others (1,6 mm instead
of 1,2 mm) what results in a further sound variation. the holes in the strips are ment to face towards the player. you could possibly use it with single hairs of a violin bow or use steel wire to mount something onto it. it's all about exploration. use the
included m3 countersunk screws (complete set only) to mount it on the microphonic soundbox mk2 or microphonic playground. you will need a tx10 (torx) screwdriver bit.
length: 120 mm
width: 9 mm
thickness: 1,2 mm / 1,6 mm
about the eggslicer harp:
eggslicer harp (german: eier-harfe) fits for the microphonic soundbox mk2 and for microphonic playground. comes with a holder and 2 m3 thumb screws.
about the saw/wave bundle:
this is a set of two objects which can be used as holders for other objects or to play and strike various things like springs, metal objects etc. the holes have the same spacing like found the microphonic soundbox or microphonic playground. there is no rule what
to do with it, please just check what it wants you to do with it and experiment.
